The Fortus 450mc 3D production system lets you build, accurate, repeatable parts faster than ever before. Produce jigs, fixtures, factory tooling and end-use parts, as well as functional prototypes to withstand stringent testing. With four layer thicknesses to choose from, you can strike the right balance between strength, detail, and FDM’s fastest build time.
Build parts as large as 406 x 355 x 406 mm (16 x 14 x 16 in.). The Fortus 450mc works with 9 standard, engineering and high-performance thermoplastics.
System Size (XYZ):
129.5 x 90.2 x 198.4 cm (51 x 35.5 x 78.1 in.) 1325lbs
- 16 x 14 x 16 inches ( 406 x 355 x 406 mm)
Material delivery options:
Two bays each for material and support canisters
Layer Thickness (material dependent):
- 0.013 inch (0.330 mm)
- 0.010 inch (0.254 mm)
- 0.007 inch (0.178 mm)
- 0.005 inch (0.127 mm)
Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater. (Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.)
- 10/100 base T connection. Ethernet protocol
- 208 VAC, 50/60 Hz, 3 phase, 16A/phase (18 amp dedicated circuit required)