CAPINC - Stratasys 3D Production Systems

System Overview

Designed and manufactured for the highest accuracy and repeatability, this production system is distinct from other additive fabrication systems. It provides part tolerances that are substantially improved over previous systems.

System Comparison Features:

Parts are produced within an accuracy of +/- .0035 inch or +/- .0015 inch per inch whichever is greater(+/- .089 mm or +/- .0015 mm per mm whichever is greater).*
Largest build envelope - 36 x 24 x 36 inch (914 x 610 x 914 mm)
The most material bays:
2 build material and 2 support material bays for extended unattended builds
Multiple layer thickness (build speed) options:
0.013 inch and 0.010 inch (0.330 mm and 0.254 mm) for faster throughput
0.007 inch (0.178 mm) for higher surface finish and feature detail
Ideal for large parts and high volume of parts

System Specifications

System Highlights:

Largest build envelope of 36 x 24 x 36 inch (914 x 610 x 914 mm)
Highest throughput – 2.2 x faster than the Fortus 200mc
Precision ball screw technology for increased accuracy, repeatability, and reliability
Holds the most material volume
Based on material, manufactured parts can be used for high heat applications

System Size (XYZ):

109.1 x 66.3 x 79.8 inches ( 2772 x 1683 x 2281 mm)

System size with manufacturing light tower (XYZ):

109.1 x 66.3 x 89.8 inches (2772 x 1683 x 2281 mm)

Build Envelope:

36 x 24 x 36 inch (914 x 610 x 914 mm)
The system will accept two build sheet sizes:
– 36 x 24 x 36 inch (914 x 610 x 914 mm) build sheet or
– 16 x 14 x 16 inch (406 x 356 x 406mm) build sheet

Build Materials:

Achievable Accuracy:

Accuracy equivalent to a well designed and molded, injected molded part

Network Communication:

10/100 base T connection. Ethernet protocol

Operating Environment:

Maximum room temperature of 85°F (29.4°C)
Maximum room humidity of 80%.

Power Requirements:

230VAC nominal 3-phase service with 5% regulation.
*230VAC as measured phase-to-phase.
50 Hz or 60Hz
40 Amp circuit

Software:

Insight^TM
Control Center^TM
FDM TEAM^TM (optional advanced software)

*Materials will be available Q2 – 2009
**ULTEM 9085 is a trademark of SABIC Innovative Plastics IP BV

Material Options

Engineered thermoplastics for production quality parts. Materials designed for greater strength and higher accuracies necessary for direct digital manufacturing (rapid manufacturing) of precise advanced prototypes, manufacturing tools, or end-use parts.

	ABS-M30	ABS-M30i¹	PC-ABS¹	PC-ISO¹	PC	ULTEM* 9085¹	PPSF PPSU
Layer Thickness
0.013 in 0.010 in 0.007 in 0.005 in	X X X X	X X X X	X X X X	X X X ——–	X X X ——–	X X ——– ——–	X X ——– ——–
Support Structure	Soluble	Soluble	Soluble	BASS	BASS	BASS	BASS
Available Colors	Natural White Black Dark Gray Red Blue	Ivory	Black	White Translucent Natural	White	Tan	Tan
Tensile Strength²	5,200 psi (36 MPa)	5,200 psi (36 MPa)	5,900 psi (41 MPa)	8,265 psi (57 MPa)	9,800 psi (68 MPa)	10,390 psi (71.64 MPa)	8,000 psi (55 MPa)
Elongation Strength²	4.0 %	4.0 %	6.0 %	4.3 %	4.8 %	5.9%	3.0 %
Flexural Stress	8,800 psi (61 MPa)	8,800 psi (61 MPa)	9,800 psi (68 MPa)	13,089 psi (90 MPa)	15,100 psi (104 MPa)	16700 psi (115.1 MPa)	15,900 psi (110 MPa)
IZOD Impact, notched	2.6 ft-lb/in (139 J/m)	2.6 ft-lb/in (139 J/m)	3.7 ft-lb/in (196 J/m)	1.6 ft-lb/in (86 J/m)	1.0 ft-lb/in (53 J/m)	2.0 ft-lb/in (106 J/m)	1.1 ft-lb/in (58.73 J/m)
Heat Deflection	204°F (96°C)	204°F (96°C)	230°F (110°C)	271°F (133°C)	280°F (138°C)	307°F (153°C)	372°F (189°C)
Unique Properties	Variety of color options	ISO-10993 certified	Highest impact resistance	ISO 10993 certified	Highest tensile strength	FST (flame, smoke, toxicity) certified material	Highest heat and chemical resistance

Get a Quote | Contact Sales | Request More Info | Buy Material

FORTUS 900mc

System Overview

System Specifications

Material Options